MARV 001 · Print file 001

MARV 001 Front Wing Print Edition

The first major part of MARV 001, prepared and ready for your printer. Choose 1:2 or full 1:1 scale: already divided into printable sections, organised for assembly, with display mount files included free.

Preview scale 1,798 × 1,141 × 493 mm
€24.99
Print-readyOrganisedFree mount included
01/ The MARV cheetah

Built for one thing. Speed.

The cheetah is on our crest because nothing on land accelerates harder. Light, precise, nothing wasted. It's how MARV 001 is built, part by part, and how every MARV release is made.

0–100 km/h≈3sThe fastest animal on land
02/ Origin

Where MARV 001 began.

Before there was a car, there was a front wing: the first major part of MARV 001 I printed, assembled and stood beside.

01

Printed

The first major part of the car to come off the printer at full size.

02

Assembled

Section by section, the moment the project stopped being a model and became a car.

03

Shared

Built in public for 350K+ viewers, with one question on repeat: can I get the files?

Fig. 01 — MARV 001 front wing and nose
Print file 001

The original wing. Ready for your printer.

This is the exact front wing from MARV 001, not a remake. It has been split, organised and prepared so you can print it at home, at the scale you choose.

It's the first official MARV Racing release, and every purchase goes straight back into building the car.

03/ Print ready

I already did the hard part.

Large-scale 3D printing is not as simple as dropping a model into a slicer. The wing has already been:

Show the cut at
Step 1 / 4

Split into printable sections

Designed around realistic print volumes.

19 parts · seams marked in red
The result

You don't get a giant 3D model and figure the rest out yourself. You get the wing ready to start printing.

04/ Two scales

Choose how unreasonable you want to be.

Select a scale to see it against the same ruler.

Plan view · mm1:2
Plan view of the wing at full 1:1 scalePlan view of the wing at 1:2 scale
05/ On the wall

Hang it nose down.

At 1:2 the wing is 899 mm across. Printed, finished and hung on its free wall mount, it becomes a sculpture for a concrete wall, a living room, a studio or the space around your rig.

The MARV 001 front wing at 1:2 scale in carbon fibre, hung nose down on a board-formed concrete wall above a walnut sideboard
1:2 — Concrete wall899 mm span
The MARV 001 front wing in carbon fibre, hung nose down on a warm plaster wall above a travertine console
1:2 — Living room
A home sim racing room with a black aluminium rig and curved monitor, the MARV 001 front wing in carbon fibre hung nose down on the concrete wall
The sim room

Built for the room you race in.

Black rig, concrete wall, the wing hung where you can see it between sessions. Made to live in the room you race in.

06/ Display, included

Every wing comes with its mount. Free.

The mount's print files come in the same download at no extra cost. Print it in black and Signal Red and the wing is ready to display the day you finish it.

The 1:2 front wing in carbon hung nose down on a light wall by its wall mountFree · Included with 1:2
Close-up from below: two red forks hold the side pods of the nose, fixed to a black wall plate
The wall mount on its own: black wall plate and two red forks
1:2 Display Edition · add-on

Wall mount

Hangs the wing nose down. Two red forks catch the side pods of the nose, a black wall plate takes the load and two bumpers keep the endplates off the wall.

  • PartsWall plate · 2 forks · 2 bumpers
  • ColoursBlack and Signal Red
  • PriceFree with the 1:2 files
  • StatusPreview · final design in progress
The full-size front wing in carbon standing nose up on its ground stand, leaning backFree · Included with 1:1
Close-up of a red cradle and keeper locking the main plane of the wing onto the black stand feet
The ground stand on its own: two red cradles on black feet joined by a tie bar
1:1 Full Size Edition · add-on

Ground stand

Stands the full-size wing nose up, leaning back 25° like a pit-lane nose stand. Two red cradles are shaped from the main plane and two keepers lock it in, so it can't lift or tip out.

  • Parts10 printed parts
  • Footprint550 × 560 mm · 278 mm tall
  • HardwareStandard M5 inserts and bolts
  • PriceFree with the 1:1 files
07/ Choose your edition

Pick your scale. The mount comes with it.

Two separate editions. Each one is a one-time purchase of digital print files, with its display mount included free.

The 1:2 front wing hung on its wall mountFree · Wall mount included
1:2

Display Edition

899 × 571 × 247 mm
€19.99

  • Front wing at 1:2

    Included

    19 print-ready parts in 6 groups.

  • Wall mount files

    Free

    Wall plate, 2 forks and 2 bumpers.

  • Organised part structure

    Included

    Clearly separated files for every component.

  • Assembly reference

    Included

    How the sections come together.

  • File updates

    Included

    Improved packages are sent to existing buyers.

The full-size front wing on its ground standFree · Ground stand included
1:1

Full Size Edition

1,798 × 1,141 × 493 mm
€24.99

  • Front wing at 1:1

    Included

    19 print-ready parts in 6 groups, full scale.

  • Ground stand files

    Free

    10 parts: cradles, keepers, feet and tie bar.

  • Organised part structure

    Included

    Clearly separated files for every component.

  • Assembly reference

    Included

    How the sections come together.

  • File updates

    Included

    Improved packages are sent to existing buyers.

Digital files only · you print and assemble · one-time purchasePrices include VAT where applicable
08/ The real wing

Not a render. The wing, in my hands.

Printed in sections, assembled by hand and photographed in the studio. The files you download are this wing.

The builder standing behind the assembled front wing, arms resting on the nose, looking into the camera
01 / Assembled
The builder holding the front wing diagonally across his body, looking down at the printed sections
02 / Hands on
The assembled front wing alone on a grey studio floor, seen from the front
03 / Studio
The builder leaning on the nose with the wing spread out in front of him
04 / Built in public
The builder carrying the wing at an angle, nose pointing to the floor
05 / Carrying 1:1
Close-up of an endplate and the three blades, every printed seam visible
06 / Seams and fixings
Close-up of the builder holding the nose and blades, seams and fixings in view
07 / Up close
01 / 07
09/ Support MARV
MARV 001 · in development

You print the wing. I keep building the car.

MARV Racing is being built in public.

Every purchase goes back into the development of MARV 001 and helps me keep building, testing and documenting the project.

You get a real piece of the build. I get to keep pushing the project forward.

Views350K+Across channels
Release001First print file
Parts19In 6 groups
Scales021:2 · 1:1
  MARV 001Build status On
Choose your edition from €19.99